Fengmi (Beijing) Technology Co., Ltd declares that the radio equipment type Mi 4K Laser Projector 150" is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: w.mi.com/global/service/support/declaration.html...
Laser Safety Information Laser Information Label Caution Do not stare into the beam The product complies with IEC 60825-1:2014 Class 1 and RG2 IEC 62471-5:2015. As with any bright light source, do not stare into the beam, RG2 IEC 62471-5:2015 Safety Instructions Before using the product, please carefully read the following safety instructions.
Page 5
Grounding Warning: This product must be grounded when in use. Transportation Instructions: It is recommended to transport this projector in its original or similar packaging. Preventing Electric Shocks and Fire Hazards: - Using an incorrect power cord may result in decreased product performance and even electric shock or fire. To ensure the projector's performance and safety, only use its original power cord or an identical replacement.
Page 6
- Do not place this projector in an upright position, as it may fall over and cause injury or damage. - Do not expose this projector to rain or moisture (operating humidity is 20%–80%). - Do not immerse this projector in, nor expose it to water or other liquids. Immediately unplug the projector if any liquid or object got into its housing, and have it checked by a qualified technician before using it again.
Mi 4K Laser Projector 150” User Manual Mi 4K Laserprojektor 150’’ Benutzerhandbuch GARANTIEERKLÄRUNG GARANTIE Manual de usuario de Mi 4K Laser Projector 150” AVISO DE GARANTÍA Manuale utente Mi 4K Laser Projector 150” AVVISO SULLA GARANZIA Руководство пользователя Лазерного проектора Mi 4K (150 дюймов) ГАРАНТИЙНОЕ...
Product Overview Exterior Vents USB 2.0 Port Height Adjustable Wheel (Right) Projection Lens Human Body Detection Power Indicator Heat Dissipation Vents Height Adjustable Wheel (Le Metal Speaker Grille Caution - Do not place any ßammable objects nearthe heat diss ipation vent. - Do not place any objects near the vents, as this may cause heat to build up inside the projector.
Connection Ports Power Port Supports USB 2.0 communication protocol HDMI input port 1 Audio output port (supports subwoofers) HDMI input port 2 AV input port (3.5 mm composite AV port) Optical digital audio signal output port HDMI input port 3 Audio return channel port Ethernet port...
Power Indicator Power Indicator The power indicator (a white light) to the corresponding projector's status is as follows: - Connect to the power outlet, the projector automatically turns on. - The indicator blinks when the projector is turning on. - The indicator turns o a er the project is turned on.
Volume + : over: Increase the volume Note: Note: With Mi 4K Laser Projector 150" and the Google Assistant, quickly access entertainment, control smart devices, get answers on screen, and more using your voice. and regulations of the country or area you live in.
Projection Distance & Screen Size Projection screen Projection screen Determine the distance between the projector and the wall or screen according to the desired screen size. Screen Dimensions (SD): Projection Distance (D) Relative Height (H) Screen Dimensions (SD) The diagonal size of the projection screen (in inches). 80"...
Suspended eiling nstallation Suspended ceiling ins tallation is one of the installation methods that you hang the projector in an overhead location, for example, on a high ceiling, through a ceiling mount. A projector supporting suspended ceiling installation has threaded holes on the bottom, you can install the project on the mount by attaching the screws into the holes.
Quick Start Guide Pairing the Remote 20 cm eries A notiÞcation will appear on the in the remote control, press corner of the projector, then simultaneously press projected image once the remote control has been paired successfully. control is pairing with the projector. Ensure they are close to each other until the pairing completes.
Image Focus Keystone Correction Go to Se gs > Image > Focus, press the le ht bu on To perform keystone correction, go to Se gs > Image > on the remote control to manually Þne tune. Keystone Correction. Use the Le ht remote bu ons to select 8-Point Keystone Correction, Fine Tune, or Reset.
Network & Internet Smart Temperature Control Go to Settings > Network & Internet. Select a wireless network The projector automatically monitors the ambient temperature to connect to, enter the password, and wait for the projector to (operating temperature range is 0°C to 40°C), projector connect.
Safety & Protection The projector comes with an infrared sensor which is able to intelligently detect and protect the human eye from damage caused by strong light within the projected area. The projector will reduce its brightness to the lowest possible value when the sensor is triggered and issue the following notification: "Do not look directly at the light source."...
Bluetooth Speakers The projector has four high-quality built-in speakers with a total output of about 30 W. The speakers can also be used as a standalone Bluetooth stereo. Tweeter Full Range Speakers Full Range Speakers Tweeter To use speakers as the Bluetooth stereo, press the Home button, then select Settings > Remotes & Accessories > Bluetooth speaker mode from the home screen.
Care & Maintenance Heat Dissipation Maintenance Inlet Outlet Note: Do not touch the heat diss ipation vent or 50 cm 50 cm ventilati on vents as temperatures can reach up t o 65°C. Note: Do not place any objects within 50 cm of the projector’s air vents, as this will a ect its heat dissipation e ect. Cleaning &...
SpeciÞcations Name Mi 4K Laser Projector 150” Model XMJGTYDS01FM Basic Information Item Dimensions 410 × 291 × 88 mm Net Weight 7.0 kg Power Consumption < 300 W (High Brightness Mode) Electrical SpeciÞcations Rated Input 100–120/200–240 V ~, 3/2.5 A, 50/60 Hz Standby Power Consumption <...
Page 21
Audio Effects Dolby Audio/ Speaker Audio Speaker Full Range × 2/Tweeters × 2 Power Supply Built-in Power Supply Built-in AC-DC, DC-DC Smart Temperature Control Automatic Brightness Adjustment/Smart Fan Speed Adjustment Safety & Protection Temperature Switch Overheating Auto Turn-off Laser Projector Eye Protection Human Body Detection Sensor (can be disabled) Noise Level dB (...
Troubleshooting Fault Solution No projected image Turn o t he projector and disconnect from the power, then plug in the power cord and turn on the projector. Android system crashes Turn o t he projector and disc onnect from the power, then plug in the power cord and turn on the projector. Screen display error Turn o t he projector and disc onnect from the power, then plug in the power cord and turn on the projector.
Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Fengmi (Beijing) Technology Co., Ltd. (a Mi Ecosystem company) Address: 301, 3F, Building 3, No.10, Barracks South Street, Renhe Town, Shunyi District, Beijing, China For further information, please go to www.mi.com...
Need help?
Do you have a question about the XMJGTYDS01FM and is the answer not in the manual?
Questions and answers