Table of Contents To users FCC Statement WEEE Laser Safety Information Important Safety Information List of Items Introduction to the Product's Exterior Connectors and Ports Power Indicator Projection Range and Projection Screen Dimensions Remote Quick Start Introduction Safety and Protection Audio Mainboard Upgrades Smart Temperature Control...
To users: Thanks for choosing the Mi Laser Projector 150". Read this manual carefully before use, and retain it for future reference. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Complies with 21 CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Important Safety Information Ensure that you carefully read the following important safety information and all product labels before using this product. Safety Label Description This label warns users that this product contains non-insulated voltage sources which can cause electric shock. Hence, there is a danger of electric shock should you come into any kind of contact with any component within.
Page 8
Guarding Against Electric Shocks and Fire Hazards - Use of improper electric cables may result in decreased product performance and even electric shock or fire, and so forth. Ensure that you use the product's original electric cabling or an identical equivalent when using this product to preserve performance and safety. - Should you use a cable extension cord, then you must ensure that it does not have a lower current rating than the product's original cable.
Mi Laser Projector 150" Remote and Battery AC Power Cord Cleaning Cloth Mi Laser Projector 150" User Manual Manual Cover User Manual Note: - There may be slight variations in the list of items that come with this product based on the specific country (or region) of sale. Please refer to your actual manual and package.
Introduction to the Product's Exterior Speaker Mesh Ventilation Hole USB 2.0 Port Height Adjustment Wheel (Right) Projector Lens Height Adjustment Power Indicator Wheel (Left) Protective Glass Lens Cover Heat Dissipation Vent Note: -The heat dissipation vent discharges heat from the device. Do not allow any flammable items near this vent.
Connectors and Ports ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ① ① Power Socket ④ HDMI 3 ARC ⑦ AV Input - HDMI signal input port 3 - Video input connector - Audio Return Connector (triple 3.5mm connector) ② HDMI input 1 ⑤...
Power Indicator Power Indicator Power Indicator: Power switch to turn the power on or off. System status prompts from the device's indicator light (a white light source): - The system will automatically turn itself off after you insert the power cord. - The indicator will flash during the shutdown process.
Projection Range and Projection Screen Dimensions Projector Screen Projector Screen Determines the distance required between the projector and the screen based on the size desired. Projector Screen Projector Distance (D) Relative Height (H) Dimensions (SD) 80" 14cm 29cm 90" 19cm 32cm Screen Dimensions (SD): Diagonal projection screen size (inches).
Remote Power Switch Press once: Turn on After the device has turned on, press the button once again to turn it off. Voice control: Voice search Arrow (Up): Move up/selection button Arrow (Left): Move left/selection button Arrow (Right): Move right/Selection button Confirm: Arrow (Down): Move down/Selection button Confirm the current option or setting...
Quick Action Introduction 1. Installing Remote Batteries and Pairing the Remote. Press the button to start pairing Ensure that the batteries are installed properly Pairing the Bluetooth Remote Remote paired If the battery compartment has insulating film, Press and hold and the button near the You can now use the remote from...
Page 16
2. Motor Focus Go to the Image Adjustment Menu in the system settings to adjust the focus. Mi Laser Projector 150" Mi Laser Projector 150" Mi Laser Projector 150" Mi Laser Projector 150" 8-Point Keystone Fine-Tune Reset Correction Mi Laser Projector 150"...
Safety and Protection Human Infrared Sensor and Front sensor range: approximately 55° degrees Fresnel Optical Lens Left and right side sensor range: approximately 70° degrees This device comes with an infrared sensor which is able to intelligently detect and protect the human eye from strong light damage within the area of the projection.
Audio The projector has four built-in, high-quality speakers with approximately 30w total output. It can be used as a stand-alone Bluetooth stereo. High Frequency Speaker Full Range Speaker Full Range Speaker High Frequency Speaker Audio Audio...
Mainboard Upgrades Mainboard System The mainboard can be upgraded in accordance wi th the pro cessor's pe r formance. The mainboard must be upgraded at an after sales service location or by being returned to the manufacturer. Users should not attempt to dismantle the mainboard themselves.
Daily Maintenance Heat Dissipation Maintenance Note: Do not touch when the heat dissipation vent or ventilation Note: hole reaches approximately 65℃. Do not allow any item to be placed within 50 cm of the project's heat dissipation vent to Exhaust Inlet avoid obstructing the heat dissipation.
Technical Specifications Model Mi Laser Projector 150" Basic Information Dimensions 410mm×291mm×88mm Weight 6.9kg Lens focus Motor focus Basic Functions Dust cover Glass Dust Cover Display technology 0.47"DMD Optical Parameters Light technology ALPD Standard resolution Full HD (1920×1080) Frame refresh rate 60/120Hz (1920×1080@60Hz is recommended for best results)
Page 22
Remote Bluetooth remote Mi Bluetooth Remote Safe Eye Protection Laser TV eye protection Body sensor (can close) Power Supply Built-in power supply Built-in AC-DC, DC-DC Case Power Supply Indicator Breathing white light Noise level <32dB@ standard mode/ambient temperature 25℃ /distance 1m Power consumption <250W(max)@ dynamic mode...
FAQs Questions Solutions The screen is not displayed Turn off the power source and remove the power cable; reinsert the power cable and restart the machine. The Android system crashes Turn off the power source and remove the power cable; reinsert the power cable and restart the machine. There is a screen display error Turn off the power source and remove the power cable;...