Sharp LC-32DH500 Service Manual page 17

3. Remote control key operation and description of display in adjustment process mode.
1. key operation
Remote control key
Cursor (▼/▲ )
OK
Cursor (◄/►)
MENU
The required input mode should be switched previously to enter the Service Mode.
CAUTION: Use due care in handling the information described here lest the users should know how to enter the
adjustment process mode. If the settings are tampered with in this mode, unrecoverable system
damage may result.
4. Description of display
Figure 1: Main Service Adjustment Menu
SHARP FACTORY MENU
Main version
Boot loader version
Normal standby cause
Error standby cause
INIT
ADJUST
ETC
PUBLIC MODE
SMARTLOADER
ADC ADJUST
GAMMA
SYSTEM INFORMATION
No. Description
(1) Service Information
(2) Item name
(3) Factory init and Inch setting
Keyboard unit
P ( / ) Moving an item (line) by one (up/down) on "Sharp Factory Menu"
s r
or submenus.
Selecting a submenu on lines 5 to 12 of "Sharp Factory Menu" or
b
executing a function.
V (+/-) Changing a selected item setting value.
MENU Return to "Sharp Factory Menu" from a submenu.
(1)
SHARP v1.23 SEES v41 MSTAR CL163508 S 1 3 2 S S S 1 4 S S
BD_MST064E_C01A 2
Remote control
None
(2)
Display specifi cation
Current Software version and others.
Submenus to be checked or adjusted (by pressing "OK" button)
Are shown on INIT submenu
Function
C 1 3 63 6 8 08 0 ← ← ← Informative (Main microprocessor version).
← Informative. ← ←
← ← ← Informative (Remote Control/Keyboard...).
← ← ← Informative (None/Lamp Error).
← ← Press "OK" to go to INIT submenu. ←
← Press "OK" to go to ADJUST submenu. ← ←
← ← ← Press "OK" to go to ETC submenu.
← ← ← Press "OK" to go to PUBLIC MODE submenu.
← Press "OK" to go to SMARTLOADER submenu. ← ←
← ← ← Press "OK" to go to ADC ADJUST submenu.
← ← ← Press "OK" to go to GAMMA submenu.
← ← ← Press "OK" to go to SYSTEM INFORMATION submenu.
(3)
17
LC-32DH500