Operation Manual - Sharp LC-19LS410UT Service Manual

Hide thumbs Also See for LC-19LS410UT:
Table of Contents

Advertisement

[2] OPERATION MANUAL

Remote control unit
POWER:
DISPLAY:
INPUT:
2. The Input List should be activated and show on OSD.
MUTE :
Number Key: 1. Press number button to direct access to TV channel
● Dot key:
ENT:
VOL +/ -:
CH +/ - :
FREEZE :
SURROUND : change audio mode (Mono/Stereo/Surround)
FLASHBACK: Press to alternate between the currently viewed program and previously
SLEEP:
Press to show the sleep-timer slider in the right side of screen. Press displays
current, subsequent presses advance (Loops)
MENU:
Cursor Key:
ENTER Key:
EXIT :
RETURN :
Back to previous level of OSD
AUDIO :
CC :
menu settings
VIEW MODE: 1. Press to toggle among screen format
AV MODE:
RED/GREEN/BLUE/YELLOW key: 1. To change some scenario in the multimedia menu
2008-03-14
Press to turn on/off the TV from on to standby mode, or inversely
Press to display information about the selected TV channel (Channel banner)
1. Press repeatedly to select the signal source:
Interrupt the sound or restore it.
2. Press the pass code to activate the factory mode
3. Press to activate the Channel Lock (enter PIN code for Channel lock)
4. If channel list OSD active – jump to that channel in the channel list
(not tune the channel until OK is pressed)
Used for the digital channels
Used for accepting the key-in channel number
Press to adjust the volume
1. Press to browse channels
2. The channel number should appear on the set
Frozen the current display
viewed program (It should return to previous view if it comes from different
signal source)
Press to activate OSD menu or exit OSD
1. Press button to navigate OSD menu
2. Cursor right key perform confirmation as well as proceed next level of OSD
3. Can use cursor left to return previous level
Press button to activate the setting/selection of OSD
Exit OSD
Press to select a Audio type if available with the TV.
Press to select CC1, CC2, CC3, CC4 and other available select by the setup
Smart Stretch / Zoom / Dot by Dot
2. Automatic function will follow TPV defined spec
Press to set the TV to a predefined picture and sound setting
2. Directly switch to the favorite TV channels
5
LC-19LS410UT, LC-22LS510UT
Automatic/ Stretch / Side Bar /

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lc-22ls510ut

Table of Contents