Beurer HT 22 Instructions For Use Manual page 16

Split end trimmer
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 12
1. Connect the device using the supplied charging cable and
a compatible USB connection (mains adapter not included
in delivery) (see Figure
2. During charging, the battery symbol in the display
played in red. Once the device is fully charged, the battery
symbol turns green.
3. Remove the charging cable from the device. The device is
now ready for use.
Direct drive function
If the battery is completely flat, you can continue using the
device immediately via mains operation.
Travel lock
The device has a travel lock. If the travel lock is activated, it is
not possible to switch on the device. The travel lock prevents
the device from switching on unintentionally (e.g. when being
carried in a suitcase).
1. To activate the travel lock, press and hold the ON/OFF button
for 3 seconds. A red suitcase symbol flashes on the dis-
2
play
. The device is now locked. If you press the ON/OFF
1
button
2
symbol flashes briefly.
2. To deactivate the travel lock, press and hold the ON/OFF
button
2
is now unlocked.
Using the device
1. Comb your hair with a large-toothed comb to get rid of any
tangles. Your hair should be clean, dry and free from styl-
ing products.
2. Slide the plate locking system
vice (see Figure
is inserted.
while the travel lock is activated, the red suitcase
again for 3 seconds. The device switches on and
). Make sure that the collection tray
B
).
A
3
down to unlock the de-
16
is dis-
1
5

Advertisement

Table of Contents
loading

Table of Contents