Device Description; Using The Device - Beurer HT 22 Instructions For Use Manual

Dispose of packaging in an environmentally friend-
21
ly manner.
PAP
Read the instructions for use.
CE labelling
This product satisfies the requirements of the ap-
plicable European and national directives.
Direct current
The device is suitable for use with direct current
only.
The products demonstrably meet the require-
ments of the Technical Regulations of the EAEU.
Disposal in accordance with the Waste Electrical
and Electronic Equipment EC Directive – WEEE.
United Kingdom Conformity Assessed Mark

3. DEVICE DESCRIPTION

The corresponding drawings are shown on page 3.
Display
1
ON/OFF button
2
Plate locking system
3

4. USING THE DEVICE

Charging the battery
The device should only be charged with a mains adapt-
er with an output of 1 A.
Before using the device for the first time, you must charge it
for a minimum of 2 hours.
Cutting chamber
4
Collection tray
5
Charging socket
6
15