Unlock the packaging locks:
GETTING STARTED
BATTERy INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
back of the unit. Use a screwdriver
to loosen the screw.
3. I n st a l l 2 n ew AAA b a t te r i e s
following the diagram inside the
battery box. (The use of new
alkaline batteries is recommended
for maximum performance.)
4. Replace the battery cover and
tighten the screw to secure.
Rotate the packaging lock 90 degrees
1
counterclockwise.
2
Pull out the packaging lock and discard.
5