Advertisement
Table of Contents
Takeaway Desk Assembly Instructions
Carefully Follow these steps to set up your Takeaway Desk
Keep children away during construction and a note that small parts could be a choking hazard
ITEM NO.
A
IMAGE
GCODE
QUANTITY
REQUIRED TOOLS:
-
Cordless Drill with a Size P2 Phillips Tip or a Size P2 Phillips head Screw Driver.
-
Measuring Tape or Ruler.
1. Place worktop (A) upside down on a flat surface and position the first leg (B) in a corner of the worktop as
follows.
Australia Wide
www.uci.com.au
Page 1
B
WORKTOP
N/A
X 1
1300 824 824
C
TAKEAWAY DESK LEG
60-01990
X 4
Version 1.1 01/04/2020
LEG SCREWS
32152
X 12
Design | Manufacture | Deliver
Advertisement
Table of Contents
Related Manuals for UCI Takeaway Desk
Summary of Contents for UCI Takeaway Desk
- Page 1 Takeaway Desk Assembly Instructions Version 1.1 01/04/2020 Carefully Follow these steps to set up your Takeaway Desk Keep children away during construction and a note that small parts could be a choking hazard ITEM NO. IMAGE WORKTOP TAKEAWAY DESK LEG...
- Page 2 Takeaway Desk Assembly Instructions Version 1.1 01/04/2020 2. Using a P2 Phillips bit, drive a screw (C) through each hole on the leg flange. 3. Repeat steps 1 and 2 for each leg on the desk, making sure the leg positioning is correct and a screw has been used on every hole.
Need help?
Do you have a question about the Takeaway Desk and is the answer not in the manual?
Questions and answers