Standard Wall Mount - Whirlpool GLADIATOR GAWG28KDYG Assembly Instructions Manual

®
Mount on GearWall Panel or GearTrack
1. Determine the cabinet mounting location on GearWall
®
GearTrack channels.
2. Using 2 or more people, engage the mounting bracket into the
wall slot by lifting up, pushing toward the wall and lowering the
bracket rim into the slot.
3. Inspect the cabinet from the sides to ensure the wall-mounting
bracket is fully engaged in the slot as shown.
A
A. Bracket rim
B. Slot
6
®
Channel
®
panels or
B
C
C. Mounting bracket,
fully engaged

Standard Wall Mount

Tools and Parts Needed
Wrench
⁵⁄₁₆" x 1¹⁄₂" lag screws (4)
⁵⁄₁₆" flat washers (4)
IMPORTANT: The round holes in the top and bottom cabinet back
panels are spaced to allow you to mount the wall cabinet to your
garage wall studs.
1. Locate the wood studs in your garage wall. Align 2 holes at the
top and 2 holes at the bottom with the wood studs, and mark the
location of the holes.
2. While 2 or more people hold the cabinet against the wall, attach
the wall cabinet to the garage wall using ⁵⁄₁₆" flat washers and
⁵⁄₁₆" x 1¹⁄₂" lag screws (not provided).
3. Using a wrench, tighten the screws completely.
A
A. Holes for standard wall mounting
A