LENCO BMC-085 User Manual page 10

Charging
⚫
Before first use make sure the device is fully charged (you can use a
computers USB port for charging)
⚫
Make sure the charging voltage is 5 Volts.
⚫
Connect the product with the included USB cable.
⚫
When charging you will see a red light
⚫
The light will turn off when full charged.
Bluetooth mode
1. Turn on the device (Long press
2. Short press the
hear a voice prompt "Bluetooth mode".
3. You can now search for the "Lenco BMC-085" with your Bluetooth
audio device.
4. If your device requires a password use the code '0000' and click
okay.
5. When connected properly you will hear a voice prompt
"Connected".
6. Play any song from your device and you can start singing along!
/M Button to switch to Bluetooth mode, you will
10
button)