Cisco SGE2000 Datasheet page 4

© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Access control
Availability
Link aggregation
Storm control
DoS prevention
Spanning Tree
IGMP snooping
Power redundancy
QoS
Priority levels
Scheduling
Class of service
Rate limiting
Standards
Environmental
Dimensions
W x H x D
Unit weight
Certification
Operating temperature
Storage temperature
Operating humidity
Storage humidity
Number of fans
Acoustic noise
Power
Power consumption
Package Contents
ACLs - drop or rate limit based on:
● Source and destination MAC-based
● Source and destination IP address
● Protocol
● Port
● VLAN
● Differentiated services code point (DSCP)/IP precedence
● TCP/User Datagram Protocol (UDP) source and destination ports
● 802.1p priority
● Ethernet type
● Internet Control Message Protocol (ICMP) packets
● Internet Group Management Protocol (IGMP) packets
● Up to 1018 rules
● Link aggregation using IEEE 802.3ad Link Aggregation Control Protocol (LACP)
● Up to 8 ports in up to 8 groups
Broadcast and multicast storm protection
DoS attack prevention
● IEEE 802.1D Spanning Tree
● IEEE 802.1w Rapid Spanning Tree
● IEEE 802.1s Multiple Spanning Tree, Fast Linkover
IGMP (versions 1 and 2) snooping limits bandwidth-intensive video traffic to only the
requestors. Supports 256 multicast groups.
Connection to redundant power supply unit for power redundancy
4 hardware queues
Priority queuing and weighted round-robin (WRR)
● Port based
● 802.1p VLAN priority based
● IPv4 IP precedence/ToS/DSCP based
● DiffServ
● Classification and re-marking ACLs
● Ingress policer
● Egress rate control
802.3 10BASE-T Ethernet, 802.3u 100BASE-TX Fast Ethernet, 802.3ab 1000BASE-T
Gigabit Ethernet, 802.3z Gigabit Ethernet, 802.3x flow control, 802.3ad LACP, 802.1d
Spanning Tree Protocol (STP), 802.1Q/p VLAN, 802.1w Rapid STP, 802.1s Multiple STP,
802.1x port access authentication
17.32 x 14.70 x 1.73 in.
(440 x 375 x 44 mm)
14.09 lb (6.39 kg)
UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A
32º to 104ºF (0º to 40ºC)
-4º to 158ºF (-20º to 70ºC)
10% to 90% relative humidity, noncondensing
10% to 95% relative humidity, noncondensing
2
55 dB max.
100–240V AC, 50–60Hz, internal, universal; also equipped with redundant power supply
connector for external power supply 48V DC
12V at 7.5A (90W)
Data Sheet
Page 4 of 5