5 Commissioning
Place the Aircleaner AC-2 in the room.
Ù
For optimal results, the air present must
be able to be continuously filtered.
Ù
Depending on the size of the room and
the degree of pollution, place one or
more Aircleaners as close as possible
to the dust source.
Connect the power cord to the mains.
6 Operation
6.1 The menu
From the start screen
selection directions are possible:
•
Switching on and off: Press
the appliance, the fan will turn on. Press
again to switch off. Instellingen:
•
Settings: Press
6.1.1 SWITCHING ON AND OFF
Press
to switch on the appliance, the fan
will turn on. If the fan does not switch on,
the following message will appear:
CLOSE
COVER. Check that the grilles are
correctly positioned on both sides and then
press
again. The fan will now switch on
and the following message will appear on the
FAN
ON.
screen:
If the fan cannot build up the required flow,
the following message will appear:
CHECK
FILTERS. See section 7 for possible
22 22
FAN
OFF, two
to switch on
to change settings.
causes and solutions. When all filters are
working correctly, the flow and thus the
machine will function properly until the
button is pressed again and the machine is
switched off.
6.1.2 SETTINGS
Press
to access the Settings. First the
version of the firmware and operating hours
VERSION /
are displayed
Press
again to change the inserted filter
package FILTERPACKAGE. By pressing
again, the test menu for the filters can be
SINGLE
FILTERTEST. Press
activated:
again to get back to the start screen with the
FAN
OFF.
text
RUNTIME.