Page 2
Any changes or modifications not expressly approved by the party responsible for compliance NUX offers various of 2.4GHz wireless systems, you can use up to 6 could void the user's authority to operate the equipment.
How to Operate Transmitter and Receiver Pairing B-3 PLUS has auto pairing and channel group selection. Please follow the steps: 1.Turn on the Transmitter and Receiver units. 2.The Transmitter and Receiver will get paired automatically. (The device Transmitter will detect current RF environment and choose the suitable Channel Female Port Group to operate while turn on.)
Page 4
100%≥Battery≥85% 85%>Battery≥60% 60%>Battery≥45% 45%>Battery≥30% 30%>Battery≥15% Battery<15% Press the power switch button to wake B-3 PLUS up. If the battery level is below 10%, the RF status indicator will flash“RED” color 10 times, then turn off. While charging, the RF status indicator will show “RED”. If the device is full of charge, the RF status indicator will turn off.
Need help?
Do you have a question about the B-3 Plus and is the answer not in the manual?
Questions and answers