Letsfit T26 User Manual page 12

Q: I paired the earbuds with my phone
before, but I failed to pair them with
my phone again.
A: Turn on the Bluetooth of your phone and
in "MY DEVICES", choose "T26" and tap
" " → "Forget This Device". Then pair
the earbuds with your phone again.
Q: Connection is not stable.
A: Bluetooth signal is transmitted wirelessly
and signals can be affected, which
results in intermittent sound of earbuds,
in the following conditions:
● The distance between the earbuds and
your Bluetooth device is at the edge of
the Bluetooth pairable distance.
● Transmitted signals encounter
obstacles or human body blockage.
● There are high-power electronic
devices nearby.
● There are other Bluetooth devices and
are being turned on / off nearby.
To resume stable connection between
the earbuds and your Bluetooth device,
try to avoid the above conditions and do
the pairing again following the steps in
the pairing fails part.
- 10 -