Letsfit T26 User Manual page 8

Pair
1) Make sure the earbuds and your Bluetooth
device are next to each other or within 3 feet
and there are no obstacles between.
2) Open the charging case. Earbuds are
automatically on and enter pairing mode.
3) Turn on the Bluetooth of your Bluetooth
device.
4) In the list of found Bluetooth devices in your
Bluetooth device, choose "T26" to pair.
Notes:
● The earbuds will directly enter pairing
mode the first time you turn them on.
● Each time you turn on your earbuds, they
will automatically connect to your last
successfully connected device if available
within the Bluetooth range.
● When the earbuds are on but not paired
with a Bluetooth device, they will be
automatically off in 5 minutes.
● Mono mode: When Bluetooth connected,
you can use either one of the earbuds only
by putting the other one back into the
charging case and closing the lid.
- 6 -