Advertisement
2600/2800/2900/3600/3700/3800/3900 Series Software, Table 3 gives memory requirements, and Table 4 gives
product numbers and descriptions.
Table 2.
Product Numbers
NM-16ESW
NM-16ESW-PWR
NM-16ESW-1GIG
NM-16ESW-PWR-1GIG
PPWR-DCARD-16ESW
NMD-36-ESW
NMD-36-ESW-PWR
NMD-36-ESW-2GIG
NMD-36-ESW-PWR-2G
PPWR-DCARD-36ESW
GE-DCARD-ESW
PPWR-PS-360W
PPWR-PS-CHASSIS
PWR-CHASSIS-360W
CAB-PPWR-PS1-1
CAB-PPWR-PS1-2
CAB-PPWR-PS2-1
Cisco EtherSwitch Network Modules are supported in the following platforms.
Table 3.
Cisco 2600 Series
Cisco 2801 Series
Cisco 2811 and 2821 Series
Cisco 2851 Series
Cisco 3620 and 3640 Series
Cisco 3660 Series
Cisco 3700 Series
Cisco 3800 Series
Cisco 2911, 2921, 2951
Cisco 3900 Series
*Note: Of the modules outlined in this datasheet, only the NM-16ESW can be used in the Cisco 2911, 2921, 2951,
3925, 3945 routers. Support for the NM-16ESW in the 2911, 2921, 2951, 3925, and 3945 will be via the network
module adapter card (SM-NM-ADPTR).
4
Can be used in an external power shelf with the Cisco 2600 or 3600 Series router or internally with the Cisco 3700 Series routers.
For Cisco 2800 and 3800 the internal router power supply should be swapped out for a new power supply with Power over Ethernet
capabilities if Power over Ethernet is required (examples of PoE enabled power supplies include PWR-2811-AC-IP=, PWR-2821-51-
AC-IP=, PWR-3825-AC-IP=, and PWR-3845-AC-IP=).
5
Only utilize the external power shelf with the Cisco 2600 and 3600 Series routers, for all other supported routers an upgrade to the
internal power supply is required.
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Product Number and Description
Description
One 16 port 10/100 EtherSwitch Network Module
One 16 port 10/100 EtherSwitch NM with Cisco pre-standard Power over Ethernet support
One 16 port 10/100 EtherSwitch NM with 1 GE (1000BaseT) port
One 16 port 10/100 EtherSwitch NM with Cisco pre-standard Power over Ethernet and GE
One Cisco pre-standard power over ethernet power daughter card for 16 port EtherSwitch NM
One 36 port 10/100 EtherSwitch High Density Service Module
One 36 port 10/100 EtherSwitch HDSM with Cisco pre-standard Power over Ethernet Power
One 36 port 10/100 EtherSwitch HDSM with 2 GE (1000BaseT)
One 36 port 10/100 EtherSwitch HDSM with Cisco pre-standard Power over Ethernet and 2GE
One Cisco pre-standard Power over Ethernet daughter card for 36 port EtherSwitch HDSM
One GE (1000BaseT) daughter card for EtherSwitch Modules
One 48V (360W) power supply for EtherSwitch Modules
One power supply chassis for Cisco 48V (360W) power supply
One power supply chassis and 48V power supply for EtherSwitch
Connects 1 EtherSwitch power supply to 1 EtherSwitch Module
Connects 1 EtherSwitch power supply to 2 EtherSwitch Modules
Connects 2 EtherSwitch power supplies to 1 EtherSwitch Module
Supported Platforms
NM-16ESW, NM-16ESW-PWR, NM-16ESW-1GIG,
NM-16ESW-PWR-1GIG
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
NM-16ESW and NM-16ESW-1GIG only*
NM-16ESW and NM-16ESW-1GIG only*
4
5
6
NMD-36-ESW, NMD-36-ESW-PWR, NMD-36-ESW-2GIG,
NMD-36-ESW-PWR-2GIG
No
No
No
Yes
No
Yes
Yes
Yes
No
No
Data Sheet
Page 7 of 9
Advertisement
