How To Use - Vornado TRANSOM Owner's Manual

HOW TO USE

1. Touch
to power unit ON or OFF.
2. Select desired speed setting by pressing
(4) speeds: 1- LOW, 2- MEDIUM, 3- HIGH & 4- TURBO. Speed is
indicated by number show on display.
3. Touch
to change from direct airflow to exhaust. Touch the
button again to change from exhaust to direct airflow.
DIRECT MODE
EXHAUST MODE
Note: When the unit is powered off, it will automatically move to
the CLOSED position (meaning it will not be in direct or exhaust
airflow modes). When first plugged in and turned on, the unit will
move to DIRECT MODE. After that, the unit will remember user
settings when powered ON/OFF.
4. The product includes an integrated thermostat and the indoor
room temperature will be illuminated on the display only when the
thermostat is activated (in AUTO MODE). Touch to activate AUTO
MODE.
or . There are four
Note: Your TRANSOM is equipped with auto-dimming controls. All
non-essential lights will turn off after a few seconds of inactivity. Only
the power button will remain illuminated. The first touch to the control
panel or remote will wake up the unit, allow for setting adjustment and
will go dark again after a few seconds of inactivity.
• Touch or button to set your ideal temperature, holding
either button for 3 seconds will allow for quick temperature
adjustment up or down by 5 degrees per second.
• While in this adjustment mode, the temperature display will
momentarily flash and then return to display the current indoor
room temperature.
• Touch the to deactivate AUTO MODE. The icon will turn white
to indicate AUTO MODE is deactivated.
Note: Temperature display is Fahrenheit only.
11
English