HUSTLER Z Diesel General Service Manual page 64

SYMPTOMS PROBABLE CAUSES
Uneven cutting height The blade(s) are not sharp
A cutting blade(s) is/are
bent
The deck is not level
An anti-scalp wheel is not
set correctly
The underside of the deck
is dirty
Tires improperly inflated
A blade spindle is bent
Flex Forks
REV D
SUGGESTED
REMEDIES
Sharpen the blades
Install new cutting blade(s)
Level the deck per the Deck
leveling and height adjust-
ment section of the General
Service Manual
Adjust the height of the
anti-scalp wheel
Clean the underside of the
deck
Adjust air pressure to 8–12
psi (55–83 KPa)
Contact your dealer
® After initial break-in period,
are installed
level the deck per the Deck
Leveling section of the
General Service Manual.
9-2 115164