Greiner Vibrograf ACS 900 Inspection And Small Maintenance

1 Inspection and small maintenance for ACS 900
Area
Body
Clean body with a soft towel. Do not use
aggressive cleaning liquid.
Doors / Side panels
Clean the doors and side panels with a soft towel.
Do not use aggressive cleaning liquid.
Filter
Check the filter pads; they can be cleaned. If too
dirty, replace them.
Plate
Clean the plate with a soft towel. Do not use
aggressive cleaning liquid.
Rubber discs
Clean the rubber discs with a soft towel. Do not
use aggressive cleaning liquid.
If too used, replace it.
Contacts of ultrasonic
Check and clean the ultrasonic contacts inside of
the machine (in the whole where the ultrasonic
tank is positioned)
 Switch off the device and disconnect the
power cable before doing this.
Ultrasonic tank
Check and clean the contacts on the underside of
ultrasonic tank.
Mechanic
Check if play in the mechanic or large Vibration
during spinning.
Änderungen vorbehalten
Greiner Vibrograf AG
Mittelstrasse 2
4900 Langenthal
Switzerland
Check or Replace if
Clean necessary
Seite 1 / 2
T: +41 62 916 60 80
F: +41 62 916 60 81
info@greinervibrograf.ch
www.greinervibrograf.ch
Remark
Filter pad
9650.01F.011
4× Rubber disc (cover)
0322.350.014
1 × Rubber disc (basket holder)
0322.310.030
Contact service centre
Copyright by Greiner Vibrogaf AG