Advertisement
Available languages
Available languages
NAME OF PARTS
FRONT VIEW & BACK VIEW
•
Please read the Instruction Manual carefully before operating the sewing machine.
•
Please save this manual in a safe place.
•
The Machine is for Household Use only.
Please read all instructions before using this appliance and keep the instructions for future
reference
IMPORTANT SAFETY INSTRUCTIONS:
This sewing machine is for domestic use only.
Do not use outdoors.
Powered by an DC/AC Adapter.
The sewing machine must be switched off with the adapter unplugged when:
•
Threading the needle
•
Changing the needle
•
Changing bottom bobbin
•
Changing parts
•
Cleaning the machine
•
After each use
CAUTIONS
•
Never leave the sewing machine unattended in the presence of children.
•
When operating the sewing machine, keep your hands away from the needle, hand wheel, upper
thread tension dial and pattern selection dial.
•
To clean the sewing machine, simply wipe it with a soft cloth and never use any harsh chemical
solutions.
2
Accessories
Foot controller
X1
Thread spool
X2
CONNECTING THE SEWING MACHINE TO THE MAINS POWER SUPPLY
1. Make sure the „powerOFF I L & H speed switch" is at the „OFF" position.
2. Connect the jack Position A to the DC input socket on the back of the sewing machine, and
connect the three-pin plug Position B into the Main power supply.
3. Connect the foot pedal Position C to the sewing machine
by inserting the jack into the foot pedal, input socket on the
back of the sewing machine.
4. You can either use the foot pedal (Please keep the power/
speed switch at the off position) or the power/speed switch
(H stand for high sewing speed whilst the L stand for low
sewing speed) to operate the sewing machine.
CAUTION:
Whenever the sewing machine is not in use, make sure it is
switched off and unplugged from the Main power supply.
INSTALLING THE BATTERIES
1. Make sure the „powerOFF I L & H speed switch" is in the „OFF" position.
2. Turn the sewing machine over on a flat surface and remove the battery compartment cover.
3. Insert 4xAA batteries into the compartment and replace the battery cover.
CAUTION:
To prevent accidental start up of the sewing machine,always
make sure that the „powerOFF I L & H speed switch" is in the
„OFF „ position when inserting, or changing the batteries.
THREADING THE SEWING MACHINE
Threading upper thread
Caution: When threading the sewing machine make sure that the"power OFF I L & H speed switch, is
in the OFF position and follow the steps 1-6 below.
Turn hand wheel counter clockwise until the needle is in the highest position.
Bobbin
X2
Needle threader
X1
Needle
X1
3
Advertisement
