Table of Contents
Advertisement
1.2 Getting started
1.2.1 Setting up
① Insert the pin into the hole and pull out the tray.
② Insert or remove your SIM card or microSD card.
Your phone only supports nano-SIM cards. Do
not attempt to insert other SIM types like mini
and micro cards as these may cause damage to
your phone.
29
Charging the battery
You are advised to fully charge the battery. Charging
status is indicated by a percentage displayed on screen.
The percentage increases as the phone is charged.
To reduce power consumption and energy waste
when the battery is fully charged, disconnect your
charger from the plug; switch off Wi-Fi, GPS,
Bluetooth or background-running applications
when not in use; reduce the backlight time, etc.
1.2.2 Powering on your phone
Hold down the Power key until the phone powers on,
unlock your phone (Swipe, Pattern, PIN, Password or
Face) if necessary and confirm. The Home screen is
displayed.
1.2.3 Powering off your phone
Press and hold the Power key until options appear, then
select Power off.
30
Advertisement
Table of Contents
