Download Print this page

Cisco Catalyst 2960S-24PD Datasheet page 22

With lan base software

Advertisement

Measured 5 Percent Throughput Switch Power Consumption (No PoE Loads)
The numbers indicate the power consumed by a typical switch under normal conditions. Normal conditions signify a
temperature of 25 degrees Celsius, atmospheric pressure in the range of 860 to 1060 mbar and relative humidity
from 30 to 75 percent. The numbers below indicate a 5 percent traffic load on the switch and its uplinks
100 Percent Throughput Switch Power Consumption (with Maximum PoE Loads)
The numbers indicate the power consumed by a typical system (the switch and the corresponding PoE loads) under
normal conditions. Normal conditions signify a temperature of 25 degrees Celsius, atmospheric pressure in the
range of 860 to 1060 mbar and relative humidity from 30 to 75 percent. Typically this power draw is realized when a
switch is running 100 percent traffic load of 64 byte sized packets on all its ports and uplinks and also drawing 100
percent PoE load .
5 Percent Throughput Switch Power Consumption (with 50 Percent PoE Loads)
The numbers indicate the power consumed by a typical system (the switch and the corresponding PoE loads) under
normal conditions. Normal conditions signify a temperature of 25 degrees Celsius, atmospheric pressure in the
range of 860 to 1060 mbar and relative humidity from 30 to 75 percent. The numbers below indicate a 5 percent
traffic load and 50 percent PoE load on the switch and its uplinks.
Table 10.
Description
Safety Certifications
Electromagnetic Emissions
Certifications
Environmental
Telco
Warranty
Cisco Limited Lifetime Hardware Warranty
Cisco Catalyst 2960-S and 2960 Series Switches come with a limited lifetime warranty (Table 11). The warranty for
the Cisco 2960-S Series switches has the same terms as our standard limited lifetime warranty plus the addition of
next business day delivery of replacement hardware where available and 90 days of 8x5 Cisco Technical Assistance
Center (TAC) support.
Your formal warranty statement, including the warranty applicable to Cisco software, appears in the Cisco
information packet that accompanies your Cisco product. We encourage you to review carefully the warranty
statement shipped with your specific product before use.
Cisco reserves the right to refund the purchase price as its exclusive warranty remedy.
For further information on warranty terms, visit http://www.cisco.com/go/warranty.
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Safety and Compliance
Specification
● UL 60950-1, Second Edition
● CAN/CSA 22.2 No. 60950-1, Second Edition
● TUV/GS to EN 60950-1, Second Edition
● CB to IEC 60950-1 Second Edition with all country deviations
● CE Marking
● NOM (through partners and distributors)
● FCC Part 15 Class A
● EN 55022 Class A (CISPR22)
● EN 55024 (CISPR24)
● AS/NZS CISPR22 Class A
● VCCI Class A
● CE
● CNS13438 Class A
● MIC
● GOST
● China EMC Certifications
Reduction of Hazardous Substances (ROHS) 5
Common Language Equipment Identifier (CLEI) code
Limited lifetime warranty
Data Sheet
Page 22 of 28

Advertisement

loading