Cisco 7200VXR Datasheet page 10

• Telnet—A terminal emulation protocol that allows remote access to the administrative interface of a switch over
the network (in-band)
• UDP—Enables an application (such as an SNMP agent) on one system to send a datagram to an application (a
network management station using SNMP) on another system; uses IP to deliver datagrams; TFTP uses UDP/IP
protocol suites
• Dynamic Host Connection Protocol (DHCP)—Lets a host automatically obtain their IP address, subnet mask,
and default route from a pre-configured DHCP server on the network
• Hot Standby Router Protocol (HSRP)—Provides fast cut-over to a backup router in the event of a system or link
failure
Product Regulatory Approvals and Compliance
Product Regulatory Compliance
The following table lists regulatory compliance standards for the Cisco 7204VXR and 7206VXR chassis.
Table 8
Compliance Standard
Product Safety UL 1950, CSA 22.2 No. 950, EN60950, EN41003, AUSTEL TS001, AS/NZ 3260, IEC 950
Emissions FCC Class A, CSA Class A, EN55022 Class B, VCCI Class 2, AS/NRZ 3548 Class A
Immunity IEC-1000-4-2, IEC-1000-4-3, IEC-1000-4-4, IEC-1000-4-5, IEC-1000-4-6, IEC-1000-4-11, IEC-1000-3-2
NEBS Level 3
Product System Requirements
Hardware Requirements
Hardware for Cisco 7200 Series Router includes:
• 7204VXR or Cisco 7206VXR chassis
• Network Processing Engine or Network Services Engine
• Input/Output controller
• Processor memory
• Input/Output controller memory
• Power supply
• Console and auxiliary cables
• Second power supply, accessories
• Port adapters
• Service adapters
Note: You must order an input/output controller and a network processing engine for the Cisco 7206VXR and
Cisco 7204VXR.
All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Cisco Systems, Inc.
Page 10 of 12