Cisco 3825 Non Proprietary Security Policy page 9

Figure 6 Cisco 3845 Rear Panel Physical Interfaces
3
1 2
CONSOLE
1
0
HWIC 3
AUX
4
2
10
The Cisco 3845 router features a console port, auxiliary port, dual Universal Serial Bus (USB) ports,
four high-speed WAN interface card (HWIC) slots, two 10/100/1000 Gigabit Ethernet RJ45 ports, four
Enhanced Network Module (ENM) slots, small form factor pluggable (SFP), power inlets, and Compact
Flash (CF) drive. The Cisco 3845 router supports two internal advanced integration modules (AIMs)
and two Ethernet connections.
front panel consists of 7 LEDs: CF LED, PVDM0 LED, PVDM1 LED, PVDM2 LED, PVDM3 LED,
AIM0 LED, and AIM1 LED. The back panel consists of 6 LEDs: SYS LED, ACT LED, SYS PWR1
LED, AUX PWR1 LED, SYS PWR2 LED, and AUX PWR2 LED.
The front panel contains the following:
•
•
•
The rear panel contains the following:
•
•
•
•
•
•
•
•
•
Table 5
1. However, an AIM module may not be installed in accordance with this security policy. There is a separate
security policy covering the Cisco 3825 and Cisco 3845 routers with AIM module installed.
OL-8662-01
4
HWIC 2 HWIC 1
CF
Do Not Remove During Network Operation
11
LEDs
Power switch
Power input
CF drive
USB ports
Console and Auxiliary ports
HWIC ports
LEDs
HWIC ports
GE ports
SFP port
ENM slots
provides more detailed information conveyed by the LEDs on the front of the router:
Cisco 3825 and Cisco 3845 Integrated Services Routers FIPS 140-2 Non Proprietary Security Policy
5 7
6
PVDM 3 PVDM 2 PVDM 1 PVDM 0 AIM 1 AIM 0
HWIC 0
12 13
Figure 5 shows the front panel and
Cisco 3825 and Cisco 3845 Routers
8 9
GE 0/1
SPD LNK
SPD LNK
SFP
GE 0/0
3
CISCO3845
1
14
Figure 6 shows the rear panel. The
1
,
9