Document Organization - Cisco 1841 User Manual

Introduction
•
•
•
•
•
References
This document deals only with operations and capabilities of the Cisco 1841 and Cisco 2801 routers in
the technical terms of a FIPS 140-2 cryptographic module security policy. More information is available
on the routers from the following sources:
•
•
•
Terminology
In this document, the Cisco 1841 or Cisco 2801 routers are referred to as the router, the module, or the
system.

Document Organization

The Security Policy document is part of the FIPS 140-2 Submission Package. In addition to this
document, the Submission Package contains:
•
•
•
This document provides an overview of the routers and explains their secure configuration and
operation. This introduction section is followed by the
page
Cisco 1841 or Cisco 2801 router" section on page 21
for the FIPS-mode of operation.
With the exception of this Non-Proprietary Security Policy, the FIPS 140-2 Validation Submission
Documentation is Cisco-proprietary and is releasable only under appropriate non-disclosure agreements.
For access to these documents, please contact Cisco Systems.
Cisco 1841 Integrated Services Router with AIM-VPN/BPII-Plus and Cisco 2801 Integrated Services Router with AIM-VPN/EPII-Plus
2
Obtaining Documentation, page 23
Documentation Feedback, page 24
Cisco Product Security Overview, page 24
Obtaining Technical Assistance, page 25
Obtaining Additional Publications and Information, page 26
The Cisco Systems website contains information on the full line of Cisco Systems routers. Please
refer to the following website:
http://www.cisco.com/en/US/products/hw/routers/index.html
For answers to technical or sales related questions please refer to the contacts listed on the Cisco
Systems website at www.cisco.com.
The NIST Validated Modules website (http://csrc.nist.gov/cryptval) contains contact information
for answers to technical or sales-related questions for the module.
Vendor Evidence document
Finite State Machine
Other supporting documentation as additional references
3, which details the general features and functionality of the router. The
"Cisco 1841 and Cisco 2801 Routers" section on
"Secure Operation of the
specifically addresses the required configuration
OL-8719-01