Cisco 2610 Datasheet page 5

Feature
Ports
Line Bit Rate (Per Port)
Line Coding
Framing Formats
Output Levels
PRODUCT NUMBERS AND ORDERING INFORMATION
Table 5 lists the product numbers of the Cisco E1/T1 ISDN PRI Network Module.
Table 5. Product Numbers of the Cisco E1/T1 ISDN PRI Network Module
Product Number
NM-1CE1T1-PRI
NM-2CE1T1-PRI
CAB-E1-RJ45BNC
CAB-E1-RJ45TWIN
REGULATORY COMPLIANCE, SAFETY, EMISSIONS, AND EMC/IMMUNITY
Table 6 shows a partial listing of regulatory compliance and safety data.
Table 6. Regulatory Compliance and Safety (Partial Listing*)
Feature
Regulatory Compliance
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Description
LEDs per module
•
C0: Tx/Rx Mon bantam jacks connected to port 0
•
C1: Tx/Rx Mon bantam jacks connected to port 1
•
EN: Network-module (NM) Enable
•
AIM: Integrated Advanced Integration Module (AIM) slot in use (future use—currently disabled)
• 1 or 2 E1/T1 ports on RJ-48C connectors
• Tx/Rx Mon bantam (tty) jacks for monitoring network activity (port selectable through Cisco IOS
Command Line Interface (CLI))
•
E1: (2.048 Mbps)
•
T1: (1.544 Mbps)
• E1: HDB3
• T1: AMI, B8ZS
•
E1: CRC4
•
T1: SF and ESF
•
E1: short-haul/long-haul
•
T1 (LBO): - 0, -7.5, or -15 dB
Description
1-Port Channelized E1/T1/ISDN-PRI Network Module
2-Port Channelized E1/T1/ISDN-PRI Network Module
E1 Cable RJ-45 to Dual BNC (Unbalanced)
E1 Cable RJ-45 to Twinax (Balanced)
Description
•
FCC Part 68, TIA-968-A
•
CS-03
•
Australia (S016, S038)
•
JATE (T1)
•
TBR4, 12, 13 (and NET5, ETS300156, ETS300 011)
© 2005 Cisco Systems, Inc. All rights reserved.
Page 5 of 8