Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Dolphin BC2009
Summary of Contents for Dolphin BC2009
- Page 1 Hand Dryer BC2009...
-
Page 2: Hand Dryer
Drip proof IP24 Isolation CLASS 1 Net Weight 4.0 kg Shipping Weight 4.5 kg Unit Size 191.4 mm (W) x 295.4 mm (H) x 101 mm (D) COVER TYPE/ COVER FINISH BC2009 - Stainless steel (#304), Satin finish (t:1.2 mm) Ver.A0... -
Page 3: General Safety Information
Hand Dryer Operating Instructions and Parts Manual Surface-mounted high speed hand dryer General safety information This product is Disconnect power at intended for installation by a qualified the service breaker before installing or service person. Use 1.2 mm² servicing. Full pole disconnection device solid conductor for wiring. -
Page 4: Installation
Hand Dryer Operating Instructions and Parts Manual Surface-mounted high speed hand dryer Installation 1. Make sure power supply breaker is switched off. Installation must be carried out in accordance with the current edition of the local wiring regulations code having jurisdiction. -
Page 5: Operation
Hand Dryer Operating Instructions and Parts Manual Surface-mounted high speed hand dryer Recommended mounting heights - from bottom edge of dryer above finished floor (AFF) 1270 mm Women 1194 mm Children 4-7 years 889 mm Children 8-10 years 991 mm Children 11-13 years 1092 mm Children 14-16 years... -
Page 6: Troubleshooting
Hand Dryer Operating Instructions and Parts Manual Surface-mounted high speed hand dryer Troubleshooting Symptom Corrective Actions for Initial Installation Failures If the dryer will not run First ensure that the breaker supplying the dryer is operational. If it is, disconnect the power and remove the dryer cover. Taking suitable precautions to avoid shock hazard, reconnect the power and check for Voltage at the terminal block. -
Page 7: Parts Diagram
Hand Dryer Operating Instructions and Parts Manual Surface-mounted high speed hand dryer Parts Diagram Parts list Description Description LED assembly HEPA Filter Sensor module HEPA Filter box Insulation Mylar shield with LNG marked HEPA Filter box - gasket Cable clamp Blower housing - Upper Terminal block Motor rubber -...