Safety Instructions - LG PAHCMW000 Installation Manual

SAFETY INSTRUCTIONS

2
SAFETY INSTRUCTIONS
The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe
or incorrect operation of the appliance.
The guidelines are separated into 'WARNING' and 'CAUTION' as described below.
This symbol is displayed to indicate matters and operations that can cause risk.
!
Read the part with this symbol carefully and follow the instructions in order to avoid risk.
! WARNING
This indicates that the failure to follow the instructions can cause serious injury or death.
! CAUTION
This indicates that the failure to follow the instructions can cause the minor injury or damage
to the product.
WARNING
!
• Installation or repairs made by unqualified persons can result in hazards to you and others.
• Installation must conform with local building codes or, in the absence of local codes.
• The information contained in the manual is intended for use by a qualified service technician
familiar with safety procedures and equipped with the proper tools and test instruments.
• Failure to carefully read and follow all instructions in this manual can result in equipment
malfunction, property damage, personal injury and/or death.
Installation
• Be sure to request to the service center or installation specialty store when installing products.
- It will cause fire or electric shock or explosion or injury.
• Always perform grounding.
- Otherwise, it may cause electrical shock.
• Don't use a power cord, a plug or a loose socket that is damaged.
- Otherwise, it may cause fire or electrical shock.
• You need to use a safely insulated power supply which follows IEC61558-2-6 and NEC Class2.
- If you do not follow, It may cause fire, electric shock, explosion or injury.
• For installation of the product, always contact the service center or a professional installation
agency.
- Otherwise, it may cause fire, electrical shock, explosion or injury.
• Securely attach the electrical part cover to Comm. Module.
- If the electric part cover of Comm. Module is not attached securely, it could result in a fire or
electric shock due to dust, water, etc.
• Always install an air leakage breaker and a dedicated switching board.
- No installation may cause a fire and electrical shock.
• Do not keep or use flammable gases or combustibles near the equipment.
- Otherwise, it may cause a fire or the failure of product.
• Do not install, remove or reinstall the unit by yourself.
- Otherwise, it may cause a fire, electrical shock, explosion or injury.