Kodak EASYSHARE V803 Manual page 106

KODAK EASYSHARE V803/V1003 Zoom Digital Camera Manual
Privacy (Dec
Home
|
2006)
http://www.kodak.com/global/en/service/publications/urg0...ml?chapsec=urg00665c6s0&pq-path=10/3905/7168/10510/10540 (4 of 4)19/01/2007 16:36:56
Picture is too light
Direct printing (PictBridge enabled printer) problems
Status
Cannot find the desired picture
The Direct print menu interface
turns off
Cannot print pictures
Camera or printer display an
error message
Previous Next
Site Investor
| |
Terms Center
Reposition the camera to reduce the amount of available light.
Turn the flash off (see
Move so that the distance between you and the subject is within the
effective flash range.
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter button
completely down to take the picture.
In Auto and SCN-Custom modes, adjust the Exposure Compensation
(see Using exposure compensation to adjust picture
Solution
Make sure you're not in Favorites mode.
Use the Direct print menu to change the image storage
location.
Press any camera button to redisplay the menu.
Make sure there is a connection between the camera and
the printer (see
Make sure the printer and the camera have power.
Follow the prompts to resolve the issue.
Blog
|
Using the flash).
Printing pictures).
brightness).