KwikGoal 9B54 Assembly Instructions Manual

ASSEMBLY INSTRUCTIONS FOR ALL 9B54 PORTABLE SHELTER FRAMES
*THIS UNIT MUST BE ASSEMBLED BY A MINIMUM OF TWO QUALIFIED PERSONS*
NOTICE Sunlight reflecting off polycarbonate panels can contribute to increased temperatures of
surrounding objects. In certain situations, these increased temperatures can damage some artificial turf
surfaces. Kwik Goal is not responsible for any damage to artificial turf.
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or
damp packaging may damage contents.
2. Read through entire instruction before beginning assembly and installation.
NOTE: Components may be packaged in one or more additional boxes.
Parts
PART # SHELTER WIDTH
UZ1559 30'
UZ1116 24'
UZ1433 21'
UZ1434 18'
UZ1435 15'
UZ1436 12'
UZ1114 9'
THIS UNIT MUST BE ANCHORED ACCORDING TO THESE INSTRUCTIONS AT ALL TIMES
THIS EQUIPMENT MUST BE STORED IN A SECURED, SHELTERED AREA WHEN NOT IN USE OR IN THE THREAT
OF HIGH WINDS. ANY WEATHER DAMAGE TO THIS EQUIPMENT WILL NOT BE COVERED UNDER KWIK GOAL'S
PRODUCT GUARANTEE. DO NOT LEAVE THIS EQUIPMENT UNATTENDED.
Crossbar (2)
(Part# SEE TABLE)
(A)
DIM (A)
362-3/8"
287-3/4"
250-7/16"
213-1/8"
175-13/16"
138-1/2"
101-3/16"
140 Pacific Drive Quakertown, PA 18951
800-531-4252 Kwikgoal.com
© 2017, Rev. 2019 Kwik Goal Ltd.
Date of manufacture sticker
Left Post (1)
(Part# UZ1103)
67-1/8"
Right Post (1)
(Part# UZ1103)
67-1/8"
NZ420 Rev. 12/04/19