Installation; Package Content - Nexxt SmartWi-Fi home security User Manual

Contact sensor
1. Reset button: for Bluetooth® connection. Press and hold
for 5 seconds to enable the pairing mode in the device.
2. Status LED
Blinking light: the device is in pairing mode.
Steady light: the device is successfully paired.

Package content

• One motion sensor
• Two contact sensors

Installation

2
1
Peel the adhesive tape from the back of the motion sensor.
Firmly press the sensor against the wall or area you want to
secure.
Peel the adhesive tape from the back of the contact
sensors and magnetic contacts. Firmly press the sensor
against the frame and press the magnetic contact against
the window or door you want to secure.