Initial Setup Mode - E&B Giftware Sportline HydraCoach User Manual

The Intelligent Water Bottle
Personal Hydration Calculator
Automatically calculates a recommended
daily Personal Hydration Goal.
Average Consumption
Displays the average amount of fluid
consumed per hour.
Drink Monitor
Monitors the total amount of fluid
consumed throughout the day.
Sip Tracker
Displays the percentage of fluid
consumed relative to your Personal
Hydration Goal.
Time Tracker
Displays the amount of time elapsed for
the day to reinforce proper pacing.
14
HydraCoach

Initial Setup Mode

After battery installation, the computer displays the program's
master screen briefly, and then automatically enters into the
Initial Setup Mode. This Initial Setup Mode may be accessed in
two ways: 1) After a battery insertion (the program will display
factory default settings), or 2) When both the Setup and Start/
Stop/Reset buttons are pressed and held simultaneously for 2
seconds (the program will display user preset settings).
The Initial Setup Mode allows you to select operational units
and enter personal data in order to customize the HydraCoach
Hydration Program to meet your needs. All steps in the Initial
Setup Mode have been preprogrammed. If an entry error is
made, complete the Initial Setup Mode program and then re-
enter from the Normal Operating Mode as described above to
revise the setting(s).
SETUP MODE BUTTON OPERATIONS
Mode Button – Toggles through units and advances digits.
Hold down for fast advance.
Setup Button – Sets units or digits and advances to the next
item or screen.
Start/Stop/Reset Button – Has no function in Setup Mode.
INITIAL SETUP MODE PROGRAM
Units of Fluid Measure
Select OZ (Ounces) or L (Liters)
as the program's default unit of
fluid measure. Note: The default
setting for Units of Fluid Measure is
Ounces (OZ).
15