Warnings And Cautions; Proper Care And Cleaning - E&B Giftware Sportline HydraCoach User Manual

It is perfectly all right to put ice in the bottle to keep your
drink cold.
When adding water to the bottle, DO NOT fill to the very
top. When the Upper Cap is screwed down, water will be
displaced and spill out.
When transporting a filled HydraCoach, especially within a
bag or other confined space, make sure that the Mouthpiece
does not become compressed or deformed in any way, or
water will be released from the system.

Warnings and Cautions

Important things to be aware of when using your HydraCoach...
DO NOT place boiling or very hot liquid into the HydraCoach
bottle as it could potentially damage or compromise some of
the seals and/or components located within the system.
The use of fluids other than water within the HydraCoach
could potentially damage or compromise some of the seals
and/or components located within the system, especially if
left to sit and dry.
DO NOT allow air to be sucked up into the system, as this
will produce erroneous readings.
The Computer is water-resistant and sealed to withstand
wet conditions. However, DO NOT deliberately place or
submerge the HydraCoach into water.
Avoid leaving the HydraCoach exposed to extremely hot or
cold conditions.
WARNING: The HydraCoach is NOT microwave safe.
Although designed and manufactured for durability and
performance, the HydraCoach contains sensitive electronic
and magnetic components. Care should be taken when
handling to minimize any risks, due to extreme impacts or
shock, which might damage the unit.
24

Proper Care and Cleaning

The HydraCoach disassembles into seven main components.
(See Disassembling and Reassembling the HydraCoach) This
allows you to clean the system easily and thoroughly. The best
methods for cleaning the individual components are as follows:
Bottle – The Bottle may be placed in a dishwasher or
washed by hand in warm soapy water. It may then be wiped
dry with a soft cloth or left to air dry. DO NOT place the
electronic module in the dishwasher.
Computer – The Computer may be polished with a soft
cloth in most cases. However, a slightly damp cloth may be
used if necessary. Note: Be careful not to scratch the lens
area. Never use solvents, abrasives, or harsh chemicals
or materials to clean the Computer. Never submerge the
Computer in water or other liquid medium. DO NOT place
in the dishwasher.
Impeller Assembly and Tubing – To thoroughly clean the
Impeller Assembly and Tubing, they should first be soaked in
warm soapy water, making sure that no air is trapped within
the components. Next, flush the system with a stream of
warm running water through the bottom end, or the end that
the longer Draw Tube attaches. Once flushed thoroughly,
it is now ready for use. To dry, the Tubing should be
disconnected from the Impeller Assembly, air blown through
the components to rid the system of excess water, and then
left to air dry.
Mouthpiece, Upper Cap and Bezel – These components
are best washed by hand in warm soapy water and then
rinsed clean. However, they may be placed in a dishwasher's
upper rack and away from heating elements if absolutely
necessary. They may then be wiped dry with a soft cloth or
left to air dry.
When not in use, the HydraCoach should be allowed to dry
completely and then stored away for safe keeping until you
want to use it again.
25