Bajaj Dominar 250 BS VI Owner's Manual page 15

CLOCK RESET
• Digital clock indicates
time in HR & MM
separated by colon ':'
• It is 12 hour clock.
• Initially ':' will be blinking
• Clock setting is possible
in TRIP 1 mode only.
Clock
Mode
Press mode push button
1.
for less than 2 sec.
Press mode & set push
2. button together for more than
2 sec.
Press mode button for
3.
less than 1 sec.
Press set button for
4.
less than 1 sec.
Press mode & set button
5.
together for more than 2 sec.
Clock set mode is selected &
6. no editing is carried out for
more than 5 sec.
TRIP1 Mode selected
':' stops blinking
Digits starts blinking
Hour digits will increase.
Minutes digits will increase.
Set value will be saved
Exit clock setting mode
Digits stop blinking ':' start blinking
Auto exit without saving set value.
If engine/vehicle rpm is given then
system will exit from clock set
mode without saving set value.
Set
11