First Use - CONQUEST V.H.P Manual

EN 018 – CONQUEST V.H.P. ALL MODELS

FIRST USE

THE WATCH IS DELIVERED IN
"ENERGY-SAVING" MODE
The watch arrives from the factory with
the hands set to twelve o'clock and the
crown is found extended to position
held in place by a small black cap
around the winding stem which needs
to be removed before proceeding.
Check with the retailer if this step
has been undertaken. If it's not the
case, proceed as follows:
2
I
2
– FIRST USE
I
Remove the black cap to release the crown.
II
Push the crown one click to position
watch automatically changes to the Swiss time
and date. It can then be set to the local time
, (refer to the section "setting the time manually").
IMPORTANT
If the crown is extended in position
rotation for more than 60 seconds, the watch
will automatically switch to "energy-saving"
mode with the hands consequently returning
to 12 o'clock.
1
II
1
2 without
, the