Follow the manual Information marked with this symbol indicates that the operating manual must be observed. You can download the current version of the operating manual and the EU declaration of conformity via the following link: BN30 https://hub.trotec.com/?id=39943 socket thermostat BN30...
Page 3
Keep a sufficient distance from heat sources. To use the device for its intended use, only use accessories and spare parts which have been approved by Trotec. Note To prevent damages to the device, do not expose it to Foreseeable misuse extreme temperatures, extreme humidity or moisture.
Display Information about the device Device description The thermostat BN30 enables the temperature control of heating devices and air conditioners from 5 °C to 49 °C. To this end, simply plug the socket thermostat in between the heating device or air conditioner and a socket, and select the desired temperature.
ü Cooling mode is switched on. Transport and storage 1. Press the buttons UP (2) or DOWN (3) to set the target temperature. Note ð The SET indication (10) flashes. If you store or transport the device improperly, the 2. Wait until the SET indication (10) no longer flashes. device may be damaged.
For further return options provided by us please Do not modify the device or install any spare parts. For repairs refer to our website https://de.trotec.com/shop/. or device testing, contact the manufacturer. The separate collection of waste electrical and electronic...