Related Manuals for Trotec BN35
Summary of Contents for Trotec BN35
- Page 1 BN35 / BN35F OPERATING MANUAL RADIOTHERMOSTAT WITH TIMER...
-
Page 2: Table Of Contents
Keep all safety signs, stickers and labels in legible condition. • Do not open the device with a tool. • Observe the storage and operating conditions as given in the Technical data chapter. radiothermostat with timer BN35 / BN35F... -
Page 3: Information About The Device
To use the device for its intended use, only use accessories and automatic temperature control of heating devices and air spare parts which have been approved by Trotec. conditioners between 0 °C and 70 °C in increments of 1 °C. For this purpose, the socket thermostat is simply plugged in... - Page 4 Target temperature indication Celsius / Fahrenheit indication Radio transmitter battery status indication Cooling / heating mode indication Operation ON / OFF indication Indication of the current ambient temperature Connection status indication Segment display for settings Timer / Mode indication radiothermostat with timer BN35 / BN35F...
-
Page 5: Transport And Storage
Automatic switch-off of the After 25 s of inactivity display Transmission frequency 2.4 GHz Radio range (in open terrain) 20 m Scope of delivery • 1 x Socket thermostat • 1 x Thermostat radio transmitter • 1 x Manual radiothermostat with timer BN35 / BN35F... -
Page 6: Operation
5. Use the + button (2) or the - button (4) to select the desired hours and minutes, and confirm with OK (1). 6. Repeatedly press the OK button (1) until you have left the settings menu and all parameters to be set have stopped flashing. radiothermostat with timer BN35 / BN35F... - Page 7 After the settings have been made, you can tell that the set mode is active by the fact that the Timer / Mode indication (24) and the operation ON / OFF indication (20) flash after automatic switch-off and restart. radiothermostat with timer BN35 / BN35F...
- Page 8 After the settings have been made, you can tell that the set timer is active by the fact that the Timer / Mode indication (24) and the operation ON / OFF indication (20) flash after automatic switch-off and restart. radiothermostat with timer BN35 / BN35F...
- Page 9 Additionally, OFF will flash on the operation ON / OFF indication (20). ð The socket thermostat is activated with the selected timer mode. 6. If the socket thermostat is activated, press the OK button (1) twice to deactivate it. radiothermostat with timer BN35 / BN35F...
-
Page 10: Maintenance And Repair
• The ambient temperature is above 70 °C. Remove the radio transmitter from the environment. The radio transmitter battery status indication (18) appears on the display: • The battery voltage is low. Exchange the batteries immediately. radiothermostat with timer BN35 / BN35F... - Page 11 Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...