Astro Pneumatic Tool 4550 Manual

Product Information

• Heavy duty construction
• Compact design
• Rubber coated clamps will accommodate
Pints Quarts and Gallons
• Quieter and faster operation
• Includes oiler

SPECIFICATIONS:

• Capacity:
• Air Consumption:
• Air Inlet:
• Speed:
• Operating Pressure Ranges:
• Shaking Time:
• Shaking Distance:
Important
4550
8.45Pint (1.06 Gallon)
1.35 CFM
1/4" NPT
1400 Cycles/Min.
90 to 120 PSI at Inlet
1.5 Min.
85~90mm
AIR OPERATED PAINT SHAKER
www.astrotools.com
Astro Pneumatic Tool Co. warrants our products to the original user against defective
material or workmanship for a period of 1 year from the date of 1st use. Astro
reserves the right to determine whether the product failed because of defective
material, workmanship or other causes and to charge back for missing parts. Astro
Pneumatic Tool Co., at its discretion, will repair products covered under this warranty
free of charge. The original user is to return the product (with the exceptions listed
below) with the distributor's name, address, adequate proof of date of purchase or a
copy of warranty card, and a short note explaining the problem. Failures caused by
accident, alteration, or misuse are not covered by this warranty.
Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user and
may not be transferred to subsequent owners.
This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some states do not
allow the exclusion of limitations of incidental or consequential damages so the above
limitations may not apply to you. All claims must be sent to:
Astro Pneumatic Tool Company
P.O. Box 251935
Los Angeles, CA 90025
PLEASE DO NOT RETURN ANY PRODUCT TO THE P.O. BOX.
CALL 1-800-221-9705 FOR INSTRUCTIONS.

Unpacking

When unpacking, check the parts diagram and part number
listing on page 3 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
AIR OPERATED PAINT SHAKER
Also Available:
#4551Paint Shaker Stand