SGS SDG8000SELR Owner's Manual

SGS SDG8000SELR Owner's Manual

Diesel generator

Advertisement

DIESEL
GENERATOR
OWNER'S MANUAL
FOR YOUR SAFETY
PLEASE READ THESE INSTRUCTIONS CAREFULLY
AND RETAIN THEM FOR FUTURE USE.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SDG8000SELR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SGS SDG8000SELR

  • Page 1 DIESEL GENERATOR OWNER’S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE.
  • Page 2: Technical Specification

    TECHNICAL SPECIFICATION SPECIFICATION Model SDG8000SELR Type Single-phase alternating current MODEL No SDG8000SELR Excitation System Controllable silicon MAX OUTPUT 6500W Voltage Adjustment Automatic Voltage Regulation RATED OUTPUT 6000W Frequency 50Hz OUTPUT AC 115 / 230V 50Hz Rated Output 6.0 Kw WEIGHT...
  • Page 3 1.5mm2 should not exceed 60m; • Fuel should be free of water or dust to prevent damage to the fuel injection pump and nozzle. for cross section of 2.5mm2 this should not exceed 100m. WWW.SGS-ENGINEERING.COM PAGE 4 PAGE 5...
  • Page 4: Name Of Parts

    We recommend SAE 10W30. Always use oil with the right viscosity for the ambient temperature in which your engine is being op erated. Use the chart when choos ing your engine oil. Access panel AC Output Sockets WWW.SGS-ENGINEERING.COM PAGE 6 PAGE 7...
  • Page 5: Filling With Engine Oil

    4. The plug is located on the bottom of the cylinder block. tery every three months and charge every six months. 5. After draining, re-tighten the drain plug and refill with the recommend- ed oil API CH-4/CF/SJ/SL diesel engine oil or higher grade. WWW.SGS-ENGINEERING.COM PAGE 8 PAGE 9...
  • Page 6: Air Filter

    4. Replace the engine oil whilst the engine is warm, after 20-hours run- 4. Reattach the air filter cover and screw on the nut. ning. 5. Ensure that old engine oil is drained out completely. WWW.SGS-ENGINEERING.COM PAGE 10 PAGE 11...
  • Page 7 1. Any abnormal sound or vibration? 2. Is the engine misfiring or running rough? 3. What about the color of the exhaust gas? (ls it black or too white?). If you notice any situation mentioned above, please contact SGS. WWW.SGS-ENGINEERING.COM PAGE 12...
  • Page 8: Maintenance Schedule

    The rated sped is too HIGH or Adjust engine speed to pro- Replace piston rings too LOW duce 52 Hz with no load Check battery condition AVR is damaged Replace AVR Check carbon brushes and slip rings WWW.SGS-ENGINEERING.COM PAGE 14 PAGE 15...
  • Page 9: Parts Diagram

    PARTS DIAGRAM PARTS LIST Description Part No Description Part No 192FA diesel engine 903629 Battery 36AH 903657 190 Front end cover 903630 M6 Butterfly Nut 903658 M8X25 Flange Bolt 902285 Battery wire (black) 250MM 903659 5.0KW Rotor assembly 903631 Battery wire (Red) 700MM 903660 Big cushion ring 10x28 903632...
  • Page 10: Ec Declaration Of Conformity

    SGS Engineering (UK) Ltd West Side Park Raynesway Derby, DE21 7AZ EC Declaration of Conformity This is an important document and should be retained MANUFACTURER’S NAME: SGS Engineering (UK) Ltd Diesel Generator TYPE OF EQUIPMENT: SDG8000SELR PART NUMBER: APPLICATION OF EC COUNCIL DIRECTIVES / STANDARD:...

Table of Contents