Advertisement
Quick Links
English
User Manual
YU Passive Speakers
Introduction
Thank you for choosing YU Passive speakers, designed by Kanto in Canada. We recommend you
read these instructions carefully before using the speakers, and keep them for future reference.
Kanto cannot be liable for damage or injury caused by incorrect setup or use of this product.
These speakers were carefully tested and inspected during production, and before packaging
and shipping. After unpacking, please check for any damage. It is rare that a unit is damaged
during shipping, but if this happens contact your retailer immediately. You can also call Kanto
directly at 1-888-848-2643 or email support@kantoliving.com.
What's in the Box?
x2
x8
User
YU Passive
Self-Adhesive
Manual
Speakers
Rubber Feet
Supporting your digital lifestyle ™
Advertisement
Related Manuals for Kanto YU Passive
Summary of Contents for Kanto YU Passive
- Page 1 Kanto cannot be liable for damage or injury caused by incorrect setup or use of this product. These speakers were carefully tested and inspected during production, and before packaging and shipping.
- Page 2 Amplifier Requirements YU Passive 4" is rated to 70 W at 4 ohms, YU Passive 5.25" is rated to 100 W at 6 ohms. 4” YUP4 70 W 4 Ω...
- Page 3 Specifications YU Passive 4" Tweeters 1 inch Silk Dome Woofers 4 inch Kevlar® Power Handling 70 W Per Speaker Impedance 4 ohm Sensitivity 86 db (2.83 V/1m) Frequency Response 60 Hz - 20 kHz Speaker Terminals Knurled Binding Post Bottom Mounting Hole 1/4"-20...
- Page 4 2 years. If equipment fails because of such defects and Kanto is notified within 2 years from the date of shipment with proof of original invoice from an authorized reseller, Kanto will, at its option, provide replacement parts or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications.