Advertisement
Microwave Ovens / OTRs Error Code List
Code
Cause
E-3*
Sensor
E-31
Open
Sensor
E-32
Short
T1 Max
E-33
Time
Error
Abnormal
E-34
Sensor
Abnormal
E-35
Sensor
Door
E-36
Open
E-4*
Sensor
E-41
Open
Sensor
E-42
Short
T1 Max
E-43
Time
Error
Dry Up /
E-44
No Load
Cool
E-45
Error
E-46
Open
Door
E-47
Open
Weight Sensor Error
Sensor open error. Value of HEX is above "FF for 5 Seconds".
Check if there is an unplugged sensor, loose wire connector,
or defective PCB.
Sensor short error. Check if the sensor shorted, or defective
PCB.
Sensor T1 Max Time Error. The initial value of HEX is under
"14" for 30 seconds while a weight sensor in operation. Check
sensor, or defective PCB.
The initial value of K calculated by a weight sensor is above
and under ±28" as value of HEX.
The value of A is "---" as a weight sensor calculates.
The door opens during sensor cooking. Check the door
latches & door switches. Cancel the present mode and restart.
Easy/Ph Sensor Error
Sensor open error. Check if there is an unplugged sensor,
loose wire connector, or defective PCB.
Sensor short error. Check if the sensor shorted, or defective
PCB.
Sensor T1 Max Time Error. Check sensor, or defective PCB.
Check if the food has already dry or the oven is empty. Insert
food and restart. Replace the sensor if necessary.
Cooling Error, not temperature chance after 3 minutes.
Remove moisture from sensor and restart.
Primary Open Error (3 Minutes). Check sensor, or defective
PCB.
The door opens during sensor cooking. Check the door
latches & door switches. Cancel the present mode and restart.
Reason/Solution
Advertisement
