Iberna ITL 413 Instruction Manual

Advertisement

INTRODUCTION
Read this manual carefully as it offers practical advice to help you get the most from your
washing machine.
1.- CONTROL PANEL
2.- LID
3.- DRUM
4.- DETERGENT COMPARTMENT
5.- FILTER
When contacting a IBERNA or one of its Technical Assistance
Centre always refer to the model (see control panel) and the
registration and series numbers which are indicated at the bottom of
the machine under the lower panel or on the warranty certificate. That
is to say, everything that appears in the box.
Providing this information will ensure a faster and more efficient service.
This Instruction Manual contains
everything you need to know about
the everyday running of your
machine. Keep it for future
reference.
An Installation and Maintenance
Manual is also provided which you
should
consult
during
installation
and
routine
maintenance of your washing
machine. The manual also contains
information about possible working
problems, advice about the wash
load, an explanation of label
symbols and hints about how to
remove stubborn stains.
15
EN
INDEX
GUARANTEE ............................................................................. 17
TECHNICAL DATA ....................................................................... 18
OPENING THE LID - LOADING ................................................ 19
DETERGENT DISPENSER ........................................................ 20
PROGRAMME SELECTION ....................................................... 21
the
CONTROL DESCRIPTION ......................................................... 22
TABLE OF PROGRAMMES ....................................................... 24
page
16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ITL 413 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Iberna ITL 413

  • Page 1: Table Of Contents

    3.- DRUM 4.- DETERGENT COMPARTMENT 5.- FILTER When contacting a IBERNA or one of its Technical Assistance Centre always refer to the model (see control panel) and the registration and series numbers which are indicated at the bottom of the machine under the lower panel or on the warranty certificate. That is to say, everything that appears in the box.
  • Page 2: Guarantee

    GUARANTEE TECHNICAL DATA ITL 413 Load capacity ................kg. Voltage ..................V. The appliance comes with a guarantee certificate. Wash motor power rating ............W. Spin motor power rating ............W. Electropump power rating ............W. 1.850 Heating element power rating ........... W.
  • Page 3: Detergent Dispenser

    OPENING THE DRUM DETERGENT DISPENSER The detergent dispenser is divided into 4 compartments: Lift the lid (A) and open completely. Next open the drum door following these instructions: • Compartment I, is for prewash liquid or powder detergent. The recommended quantity is 60 gm of detergent (for 5 kg Press catch (B) and kept it pressed down.
  • Page 4: Programme Selection

    PROGRAMME SELECTION CONTROL DESCRIPTION MOD. ITL 413 WHEN SELECTING A PROGRAMME, ENSURE THAT THE START/STOP BUTTON IS NOT ACTIVATED. To select a programme: • Programmes are selected by means of the corresponding control knob (A). See the table of programmes.
  • Page 5: Table Of Programmes

    USE OF THE SELECTION CONTROLS TABLE OF PROGRAMMES MOD. ITL 413 MOD. ITL 413 . PROGRAMME SELECTOR KNOB MAX. DETERGENT SEL. This control allows you to select the washing programmes. TYPE OF PROGRAMME LOAD PROG. FABRIC IN KG Cº ALWAYS ROTATE the control in a clockwise direction, never •...
  • Page 6 NOTE: 1. If the wash load is very dirty it is best to reduce the load weight to 3 kg. 2. In programmes 5-6-7-8-9-10, the washing machine stops with water in the drum at the end of the rinse cycle to prevent creasing. The cycle may be ended in two ways: - Move the programme selector forward one step.

Table of Contents