Starting Your Sensor - Abbott FreeStyle Libre 2 User Manual

Starting Your Sensor

Step
1
2
22:23
No Active Sensor
Start New
Sensor
3
OK
New Sensor
Starting Up
Sensor can be used in:
60
minutes
Press the Home Button to turn on the Reader .
Touch Start New Sensor .
Review
History
Hold the Reader within 4 cm (1 .5 inches) of the
Sensor to scan it . This starts your Sensor . If sounds
are turned on, the Reader beeps when the Sensor
has been successfully activated . The Sensor can
be used to check your glucose after 60 minutes .
Note: If the Sensor is not successfully scanned
within 15 seconds, the Reader displays a prompt
to scan the Sensor again . Touch OK to return to
the Home Screen and touch Start New Sensor
to scan your Sensor .
Action
24