Advertisement

Singxer SDA‐2 User Handbook
 
广州声仕电子有限公司
 
Guangzhou Singxer Electronic Co., Ltd. 
 
地址:中国广东省广州市番禺区新造镇 
Address: Xinzao Town Panyu District Guangzhou City Guangdong province, China 
电话:180‐7881‐2020 
Phone number: 86 180‐7881‐2020 
联系人:陈先生 
Contacts:Mr.chen 
E‐mail:    leter@singxer.com 
E‐mail:    leter15@foxmail.com 
Skype:    leter@singxer.com 

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SDA-2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Singxer SDA-2

  • Page 1 Singxer SDA‐2 User Handbook   广州声仕电子有限公司   Guangzhou Singxer Electronic Co., Ltd.    地址:中国广东省广州市番禺区新造镇  Address: Xinzao Town Panyu District Guangzhou City Guangdong province, China  电话:180‐7881‐2020  Phone number: 86 180‐7881‐2020  联系人:陈先生  Contacts:Mr.chen  E‐mail:    leter@singxer.com  E‐mail:    leter15@foxmail.com  Skype:    leter@singxer.com ...
  • Page 2 Singxer SDA‐2 All‐In‐One DAC User Handbook 1. Thank you for choosing Singxer product. Please check the appearance and all its accessories carefully once you have Singxer SDA‐2 in hand. 2. Before you supply AC mains power to the SDA‐2, please check your power supply AC voltage. There are 2 kinds of input AC voltage selectable according to the switch label 110V and 220V. 110V is for input AC voltage 115VAC and 220V is for input AC voltage 230VAC. Attention: wrong AC voltage input will damage the SDA‐2. Once power cable is...
  • Page 3 使用我们提供的驱动;LINUX 和 MAC 自带驱动,不需要另外安装驱动。 4. 电脑或者数字播放器识别到 SDA-2 之后,设置播放器,选择 SDA-2 作为输出 设备;点击播放,SDA-2 显示对应的采样率。 5. 多数播放器设置正确才能播放 DSD;如果 DSD 采样率显示不对,大部分情况 是 DSD 播放设置问题;设置步骤请参考我们的其他文档。 6. SDA-2 的前面板采用 OLED 屏显示各种信息,没有触摸功能;一共 5 个区域显 示,分别是数字滤波器(D-filter),模拟输出状态 PRE,音量 VOL,输入源和 采样率。 7. 数字滤波器在 PCM 模式下有 6 种,分别是 SHARP/SLOW/S-sharp/S-slow/NOS/   Low-dispersion ;DSD模式下只有NOS 一种。...
  • Page 4 24.57M , 分 别 对 应   DSD64-DSD512。 12.三个按键是 INPUT,D-filter,PRE;其中 PRE 需要长按才能切换模式。旋钮 有三个功能,分别是音量的加减;单击是控制输出静音,OLED 显示 MUTE;长 按 2 秒是待机状态,OLED 屏关闭,OLED 屏右边的 LED 待机灯亮起,按下任意 键退出待机。待机状态下,只是关闭了输出,但是内部电路是正常工作的。 13.遥控器的功能和上述按键旋钮的功能是对应的,其中 PRE 需要长按 2 秒,V+ 代表音量增加,V-代表音量减少,MUTE 是静音,POWER 标注代表待机,上面 白色的是 LED 指示灯。PLL,Bri,INV 三个键功能为备用键,在 SDA-2 上面无 作用。 SDA‐2 HDMI‐I2S jumper setting table  PS Audio  HOLO  SW  Describe(ON)  Silk screen  Audio‐GD ...

Table of Contents