Sencor SVC 1025GR 3AAA Manual page 3

■ Make sure the power cord is not touching a hot surface or sharp objects.
■ Do not submerge the vacuum cleaner under water or any other liquid and do not rinse it under running water.
■ Before turning on the vacuum cleaner, make sure that all the inflow and outflow filters are installed in their place.
■ When the vacuum cleaner is running, ensure that the air outlets and the suction hole are not blocked.
■ Do not use the vacuum cleaner to vacuum the following items:
- smouldering cigarettes, burning items, matches or embers;
- water and other liquids;
- flammable or volatile materials;
- items, e.g. broken glass, needles, pins, etc.;
- flour, wall plaster, cement and other building materials;
- larger pieces of paper or plastic bags, which can easily block the suction hole.
■ Vacuuming of some types of floors or floor surfaces can create an electrostatic discharge, which presents no danger to the user.
■ Do not place the suction nozzle or tube against any parts of the face.
■ Always turn off the vacuum cleaner and disconnect it from the power socket when leaving it without supervision, after finishing using it and before cleaning it.
■ Disconnect the power cord from the power socket by pulling on the plug, never pulling on the cord. Otherwise, this could damage the power cord or the
socket. It is recommended to hold the power cord in your hand when winding it up.
■ If the power cord is damaged, have it replaced at a professional service centre. It is forbidden to use the vacuum cleaner if it has a damaged power cord.
■ Do not use the vacuum cleaner if it is not working correctly, if it has been damaged or has been submerged in water. Do not repair the vacuum cleaner yourself
or make any adjustments to it. Have all repairs or adjustments performed at an authorised service centre. By tampering with the appliance, you risk voiding
your legal rights arising from unsatisfactory performance or quality warranty.
Copyright © 2020, Fast ČR, a.s. - 3 -
09/2020