YOKOGAWA 94016 User Manual

User's
Manual
Thank you for purchasing the AC adapter.
This product is designed to be used by a person with specialized knowledge.
This User's Manual describes the specifications and handling precautions of the AC adapter.
Before using the AC adapter, thoroughly read this manual to get a clear understanding on proper use.
For detailed handling procedures, refer to the instrument (main unit) User's Manual.
This manual is an essential part of the product; keep it a safe place for future reference.
WARNING
• To prevent the possibility electrical shock or fire, be sure to use the AC adapter and
the power cord supplied by YOKOGAWA.
• This product is intended for use in combination with Yokogawa products that refer to it only.
• Check that the power source voltage matches the supply voltage rating of the AC adapter,
and then connect to the outlet.
• Check that the power switch of the instrument is turned OFF and then connect the AC adapter.
• If the instrument is not used for a prolonged period, disconnect the AC adapter from the outlet.
• Do not place anything on the AC adapter or power cord, and prevent heat sources from coming
into contact with them.
• When unplugging the power cord from the outlet, be sure to hold the plug and never pull
the actual cord.
• When cleaning the AC adapter, disconnect the AC adapter from the outlet and gentry wipe
the external surfaces with a soft clean cloth. Do not use chemical such as benzine or thinner.
• Do not throw (dispose of ) the AC adapter in fire or apply heat to it.
• Do not use it, where the code is bundled (bent).
• If the power cord is damaged, contact your dealer.
Model
94016
Make sure that the attached power cord meets the designated standards of the country and
area that you are using it in.

■ Specifications (Power Supply Rating of the AC Adapter)

Rated supply voltage:
Rated supply frequency:
No load Current:
Output voltage rating of AC adapter:
Operating temperature:
Safety standards:
EMC standards:
94016
AC Adapter
Suffix Code
-F Power cord:
-S
All Rights Reserved, Copyright ©
2014 Yokogawa Test & Measurement Corporation
Printed in Japan
Specifications
VDE standard
BS standard
220 to 240 VAC
50/60 Hz
45 mA
8.5 VDC, 150 mADC
-10 to 40°C
EN 60950-1
Pollution degree 2, Indoor use,
Altitude 2000 m or less
EN 55032 Class B, EN 55024
EN 61000-3-2, EN 61000-3-3
IM 94016-EN
6th Edition: Nov. 2020 (YMI)