Contour Design RollerMouse mobile Manual page 8

1.
Restart Bluetooth pairing:
Press button
B
press and release button
release button
2.
Select Bluetooth-only connectivity:
Press button
B
press and release button
release button
3.
Select dongle-only connectivity:
Press button
B
press and release button
release button
7
Pairing and Secondary Options
. While continuing to hold
two times, then
C
.
B
. While continuing to hold
three times, then
C
.
B
, while continuing to hold
three times, then
D
.
B
• When the device is plugged in through the USB cable, this connection overrides wireless connectivity.
• Please visit contourdesign.com/BT for further information regarding your Bluetooth connection.
• If Bluetooth- or dongle-only connectivity is activated, the RollerMouse Mobile will retain
connection when the device is powered off then powered back on again.
4.
Restore pairing with dongle:
, Unplug then re-plug the dongle to the unit
B
to enable pairing. Hold the device close
to dongle and press button
continuing to hold
button
,
B
5.
Reset wireless function to
automatic pairing mode:
Press button
to hold
,
B
, then release button
C
B
, press and release
B
two times, then release button
D
. While continuing
B
, Press and release button
B
.
B
. While
.
B