ECOVACS ROBOTICS WINBOT X Instruction Manual page 20

3. Maintenance
Other Components
Fan: Clean it with the finishing cloth to keep the suction at the peak
performance.
Side Rollers: Clean the Side Rollers with the finishing cloth to ensure
sensitivity.
20
EN
Edge Detection Sensors: Clean them with the finishing cloth.
* After WINBOT emits a low battery report, please fully charge WINBOT
to prolong the battery service life before using or storing WINBOT.
* If WINBOT will not be used for a long time, please fully charge
WINBOT and then power OFF before storing it. Charge it every 6
months to prevent potential battery damage.