Assembly/Panel Removal; Stand Removal; Rear Cover Removal - Philips 32PFS6402/12 Service Manual

3.2 Assembly/Panel Removal

3.2.1

Stand removal

Refer to 3-1 and 3-2 for details.
Warning: Disconnect the mains power cord before removing the rear cover.
1. Remove fixation screws [1] that secure the base assy, pull out the base assy from the set. Refer to 3-1 for details.
2. Remove the fixation screws [2], [3] and [4] that secure the rear cover. Refer to 3-1 for details.
3. Unplug the connector [5] from SSB. Refer to 3-2for details.
4. Gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear cover from the set.

3-1 Rear cover removal[1]

3-2 Rear cover removal[2]