Page 1
Anleitung_BT_CS_18_Li_EX_AUS__ 03.05.12 10:16 Seite 1 Original operating instructions Cordless Circular Saw 18 Li Art.-Nr.: 43.309.85 I.-Nr.: 11011 BT-CS...
Page 2
Anleitung_BT_CS_18_Li_EX_AUS__ 03.05.12 10:16 Seite 2 20 19 18...
Page 3
Anleitung_BT_CS_18_Li_EX_AUS__ 03.05.12 10:17 Seite 3...
Page 4
Anleitung_BT_CS_18_Li_EX_AUS__ 03.05.12 10:17 Seite 4 19 18...
Page 5
Anleitung_BT_CS_18_Li_EX_AUS__ 03.05.12 10:17 Seite 5 “Caution - Read the operating instructions to reduce the risk of injury” Wear ear-muffs. The impact of noise can cause damage to hearing. Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos! Wear safety goggles.
Anleitung_BT_CS_18_Li_EX_AUS__ 03.05.12 10:17 Seite 6 g) Always use saw blades of the correct size Important! and with a suitable mounting hole (diamond- When using equipment, a few safety precautions shaped or round). Saw blades that do not must be observed to avoid injuries and damage. match the mounting parts of the saw will not Please read the complete operating manual with due rotate truly and will result in a loss of control.
Page 7
Anleitung_BT_CS_18_Li_EX_AUS__ 03.05.12 10:17 Seite 7 d) Support large panels to reduce the risk of a recoil by a jammed saw blade. Large panels Important: Laser radiation may sag under their own weight. Panels must be Do not look into the beam supported on both sides both near the saw gap Laser class 2 and also at the edge.
Anleitung_BT_CS_18_Li_EX_AUS__ 03.05.12 10:17 Seite 8 2.2 Items supplied 4. Technical data Open the packaging and take out the equipment with care. Voltage supply: 18V d.c. Remove the packaging material and any packaging and/or transportation braces (if Idling speed: 3600 rpm available).
Page 9
Anleitung_BT_CS_18_Li_EX_AUS__ 03.05.12 10:17 Seite 9 Keep the noise emissions and vibrations to a 5.2 Setting the cutting depth (Figure 3) minimum. Release the lever on the rear of the guard hood Only use appliances which are in perfect working for adjusting the cutting depth (11). order.
Page 10
Anleitung_BT_CS_18_Li_EX_AUS__ 03.05.12 10:17 Seite 10 6. Operation contact with the workpiece. Hold the circular saw firmly with both hands. Important. For safety reasons the hand-held circular 6.3 Switching ON/OFF (Fig. 1) saw must not be operated with the Allen key (10) inserted in it.
Identification number of the machine Replacement part number of the part required For our latest prices and information please go to www.einhell.com.au 8. Disposal and recycling The unit is supplied in packaging to prevent its being damaged in transit. This packaging is raw material and can therefore be reused or can be returned to the raw material system.
Page 12
Anleitung_BT_CS_18_Li_EX_AUS__ 03.05.12 10:17 Seite 12 The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of ISC GmbH.
Page 13
Anleitung_BT_CS_18_Li_EX_AUS__ 03.05.12 10:17 Seite 13 Technical changes subject to change...
Page 14
Anleitung_BT_CS_18_Li_EX_AUS__ 03.05.12 10:17 Seite 14...
5. The Einhell Express Guarantee is valid for a period of 2 years starting from the purchase date of the product. Claims made under the Einhell Express Guarantee should be submitted before the end of this guarantee period and within two weeks of the defect being noticed.
Page 16
Anleitung_BT_CS_18_Li_EX_AUS__ 03.05.12 10:17 Seite 16 EH 04/2012 (02)